Download Firmware
r-WASD Digital 16 V2 2026 firmware v2.5.1 hw3
For Left-Sided version only!
– Analog XInput Mode: You can now choose the joystick for character control. From now on, in dual-input-ready games you can take full advantage of an analog stick. You’re free to switch between DIGITAL and ANALOG stick modes at any time. Important: When using Analog Mode, the r-MAPPER GUI must be running in the background.
– Auto Calibration: If you don’t want to mess with manual offset adjustments, just use the automatic calibration. Important: During calibration, make sure the joystick is centered and in a resting position.
Step-by-step update process:
1. Uninstall the previous version of r-MAPPER.
2. Download and install r-MAPPER V4.5
3. Launch the application. The info bar may display a message about an incompatible device — this can be safely ignored.
4. Download the appropriate 2.5.1 firmware for your device.
5. Extract the downloaded ZIP file. 6. In the GUI, click the “Firmware update” button and browse to the extracted firmware file.
7. Start the update process. The update takes approximately 35 seconds.
8. Once complete, we recommend performing a “Reset to factory” to fully initialize the new firmware. Your device is now ready to use!
Usable GUI